1V1T Prewired 2 Pickup Guitar Harness, PUSH PULL COIL SPLIT, 3WToggleSwitch(CHR)

Description

1V1T Wiring Harness
Prewired Two Pickup Coil Split Harness
Featuring Push-Pull COIL SPLIT
1 Push Pull Volume Control Pot + 1 Standard Tone Control Pot
Brand New Dragonfire Pre-Wired Electric Guitar Harness
~~ITEM DESCRIPTION~~
These customized hand-wired VT harnesses work well with most Two Pickup Systems featuring coil split capabilities. Each harness is unique, wired to order, and may vary in appearance from the sample images.
This prewired harness features the following default options.
*1 Standard 3 Way Open Toggle Switch
*1 Standard Push-Pull Volume Control Pot (Linear / B500K Pot Style)
*1 Standard Split Shaft Tone Control Pot (Audio / A500K Pot Style)
*1 Standard 0.047 Mylar Chiclet Tone Cap
*1 Standard Mono Style Jack (9mm mounting hole; tightens to your existing jack plate)
Customizable Options & Upgrades Available! Contact us for more information.
These harnesses use push-pull small volume pots (dime size / mini pots) for coil splitting and standard full-size large (quarter size) tone pots. These pots have long shafts for body mounting. If you are going through a guard or have a non-standard set-up, you may need additional nuts/washers (available separately) or other modification. This style of pot will work with most coarse-knurled, 18-spline style knobs (available separately).
The Coil Split Wiring incorporated into this harness allows you to split humbucker coils in half, cutting one coil out and allowing humbuckers to perform as single coils (also known as Coil Cut or Coil Tap). Four wire pickups are required for a coil split to work and this harness will split both pickups at the same time if they are both humbuckers.
Installation requires soldering. Basic instructions are provided with purchase to show the solder connections needed. Please know your abilities, requirements, measurements and needs to make sure this item will work for you. We are available to answer any questions before you buy. We also offer solderless harness options – contact us prior to purchase for more information.
We wire each harness to order and offer many style and upgrade options along with typical replacements in standard and left-handed versions. We can accommodate many styles and preferences. If you don’t see what you are looking for, contact us for a link to one of our existing eBay listings or if appropriate, we’ll create a new listing for what you want.
~~APPROXIMATE MEASUREMENTS~~
*Switch Shaft Diameter: 11.7mm
*Overall Switch Height: 50mm
*Switch Insertion Depth: 23mm
*Switch Base Diameter: 17mm
*Pot Shaft Length: 18mm
*Push-Pull Pot Dimensions: 16.5mm (diameter) & 45mm (height)
*Push-Pull Pot Requirements: 10mm (hole diameter) & 28mm (depth)
*Standard Pot Dimensions: 24mm (diameter) & 30mm (height)
*Standard Pot Requirements: 10mm (hole diameter) & 12mm (depth)
*Standard Mono Jack Length: 15mm (without pins)
*Standard Mono Jack Diameter (Mounting Hole Required): 9mm
*8” Insulated Wire Length (contact us prior to purchase if you need a different wire length)
Variability is to be expected as measurements provided are approximations and based on the default options. Options selected will determine actual measurements. Ask any questions regarding options, measurements, installation, requirements, special requests, etc. prior to purchase.
~~PURCHASE NOTES~~
Buyers assume all risk of use; sales are only offered to those competent to safely and lawfully purchase and use items. ASK ANY QUESTIONS PRIOR TO PURCHASE. Due to the vast and varied nature of possible set-ups and user expertise, we do not provide specific information for every possible installation scenario. The provided BASIC instructions will get you started, but we expect that you have basic knowledge of soldering and installation techniques. Please ask any questions before you buy if you are unsure of your needs or ability to make modifications.
Note that we do not recommend installation using power tools as these can put too much force on the product and cause damage. Installation is best with moderate heat only (don’t have your iron too hot). Pay attention during install to avoid damage; components are sensitive. Excessive or prolonged heat can cause irreparable damage. This item is prewired. If your set-up requires you to disconnect the wires, be sure to take a picture or make note of the connections so you can reattach (solder!) properly. We do not recommend a clip/tie method for installation.
Inspect your order upon receipt. We will address any issues PRIOR to installation. Installation, modification, or use in any way invalidates the possibility of a return.