Used 110V 250W Round Carbide Saw Blade Grinder Sharpener Machine

Description

Saw Blade Grinder Sharpen Machine
The machine is designed for sharpening various kinds of carbide tipped saw blades from size 80mm to 700mm.It's also suitable to grind other material, such as plastic, wood, aluminum alloy for different purpose like furniture manufacturing, decoration etc. Its fascia can support the teeth of saw blades and other parts in order to prevent jumping and improve grinding quality .
Parameter:
Voltage
110V
(if you need 220V,please contact with us)
Grinding Wheel Size
4.92"(12.5cm)
Bore Size of Grinding Wheel
1.26"(3.2cm)
Adjusting Range of Grinding Wheel
+/-20 degrees
Power
2
5
0w
Handle Turning Angle
30 degrees from left and 45 degrees from right
Revolution
2850rpm
Product Dimension
28.35"x16.93"x11.81"(72x43x30cm)
Package Dimension
16.93"x16.93"x13.58"(43x43x34.5cm)
Weight
70.4lbs (32kgs)
centering arbor size
5/8" (15.87mm); 0.79"（20mm); 0.86"(22mm), 1" (25.4mm); 1.18"(30mm); 1.57"(40mm)
Method of operation
First
,loosing the fascia, then adjust the angle of grinding blade and fasten.
Second
, adjusting of center axle
1)Rotating the center axle to the grinding blade
2)Pushing the center axle to the right
3)Installing the saw blade ,rotate the wheel and decide the position of grinding surface saw teeth
4)Rotating the rotation table to ensure the angle of grinding blade.
5)The cross angle between the grinding surface and work surface is about 5
°
Third
, adjusting of positioning assembly
1)Adjusting the saw blade to the best grinding position, rotating the positioning frame and fascia,
2)
Adjusting positioning pin to the proper base of saw teeth and leave gap of grinding quantity, fasten the fixed screw
Fourth
, adjusting the center axle to the same gap of grinding quantity to the right
Last
, when all the parts are fastened, the saw blade supported with hand will be grinded
1.base
2.box body
3.end cover
4.rotatary base
5.rotary table base
6.rotary table
7.slide base
8.slide disc
9.table
10.guide nut base
11.guide screw
12.slide block
13.frame
14.board
15.positioning board
16.safe cover
17.press board
18.adjusting bolt
19.upright post
20.long bolt
21.short bolt
22.long handle
23.short handle
24.positioning pin
25.mat cover
26.diamond wheel
27.cover
28.motor
29.rear stuck disc
30.fore stuck disc
31.big pin
32.small pin
33.hand wheel
34.round handle
35.turret handle
36.earth foot
37.adjusting bolt base
38.fastening handle
39.switch
40.screw
41.lirnit pin
42.washe
43.cover
Item Included
:
1 set of 110V Saw  Blade Grinder Machine (153026)